Nowadays, Roomba vacuum cleaners are among the most prominent smart vacuum cleaners. These have the ease and ability to clean floors on their own. Besides this, like other digital devices, they also experience common issues, such as Roomba Red Light.
Primarily, this issue may appear due to low power or other errors in the Roomba vacuum, which are shown on the app by pressing the Clean button. Similarly, if you are worried about the red light on Roomba, then read this page. Here, you will find the reasons behind this issue and some simple fixes to resolve it.
Why is Roomba flashing red light?
As discussed above, this may happen for two main reasons but a few of the other causes are also responsible for this. So, take a look at them:
- Low Battery or Issues with the Battery
- Charging Flaws
- Dirty charging contacts
- Faulty Charging Base
- Damaged Power Cord/ Battery
- Sensor or Software Issues
- Specific problems regarding an error code
How to fix the Roomba red light issue on your smart vacuum?
Moreover, you are now aware of the primary issues that may be responsible for the red light on Roomba vacuum. Similarly, before you move forward with the troubleshooting methods to resolve the red light issue, you must understand the solid and flashing red light once. So, take a look beneath:
The solid red light on Roomba
The battery needs recharging or dropped completely. This gives rise to the error messages that you can check on the iRobot Home app.
Roomba flashing red light
Extremely low-charge vacuum battery or the bin is full.
Quick Troubleshooting Tips
Now, it is time to take a closer look at the necessary troubleshooting steps to resolve the red light error on the smart vacuum, so take a look beneath:
Battery Charging
To restart or restore your Roomba, if it has a red light for a low battery, just put it on the charging base for a few hours. Make sure that the Roomba is aligned with the charging contacts. Also, check that the battery has perhaps reached the end of its service life, and a replacement may be required.
Clean the Charging Contacts
Sometimes, the problem is due to the dirty or corroded charging contacts between Roomba and the docking station. For this, clean the charging contacts with a soft dry cloth. If the dirt is baked on, turn off the vacuum and the dock station first, now you can moisten the cloth but take care not to get any water inside the unit.
Update the software
In addition, other issues could be due to older firmware or bugs on the device. If your Roomba model is Wi-Fi enabled, check for any available software updates within the iRobot Home app. If present, then follow the guidelines to complete the process.
Clear the Blockages
Generally, Roomba smart vacuums can collect hair dust and other junk inside themselves that blocks the brushes or wheels. Hence, to clean blockages, turn off the smart vacuum first, remove the brushes and wheels, and then clean off any debris caught in the brushes or wheels. After that, rejoin the attachments and ensure that all the parts are screwed on tightly.
Cool Down the vacuum
Further, overheating might also be caused by the clogged brush or sensor, thus enabling the red light to turn on. So, it is mandatory to power off the Roomba and let it cool down.
Battery Replacement
In case the battery is suspect or old, it may require replacement. Typically, Roomba batteries serve for 1 to 2 years depending on the usage frequency. To check and replace the battery, power off the Roomba initially. Next, remove the battery cover at the bottom of the vacuum. Drag the old battery and place a new one inside. Put the battery cover back in place and charge the Roomba.
Check the Sensor Functioning
Initially, clean the sensors of the robotic vacuum. Use a soft cloth to clean them. Also, check the functioning of the sensors as your vacuum play sounds when the bin is full or Roomba says “Please inspect and clean Roomba’s cliff sensors.” If there is no voice or sound from your vacuum, then you need to contact the experts or reach us to know more.
Hard Reset the Roomba
If the red light won’t stop lighting up and you are unable to determine where the problem should be, then factory reset the Roomba is a good option to fix the issue. To know the complete reset process of this vacuum, approach us!
Wrapping Up
All things considered, you now find detailed information on the Roomba red light issue. From reasons to easy troubleshooting, you get everything in this brief post. If you still want to know more about the Roomba smart vacuums, then stay tuned to us!